Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of Turbo Crusher for MICA Powder technology in my country is the stable development of the Turbo Crusher for MICA Powder technology.
Turbo Crusher for MICA Powder has a wide range of pulverized granularity, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.
The crushing effect is mainly affected by the following factors:
The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.
When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
In order to let everyone have a further understanding of Turbo Crusher For MICA Powder, the following simply analyze common problems and how to solve these problems.
1, ask: How to choose equipment in the face of materials that need to be smashed?
A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
2, ask: The custom pulverizer can be used in different materials. What is the difference between them?
A: (1) After the food and drug is crushing, it is necessary to meet the level of food safety, the best choice for stainless steel materials, because the mirror is polished inside and outside, does not produce iron pollution. (2) Broken material is easy to worn, and the purity is high after crushing, and the stainless steel is the most.good.(3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.
Shandong AlPa is a source manufacturer specializing in Turbo Crusher for MICA Powder. All the year round provides equipment for domestic and foreign customers. Welcome to inquire!
