Vibration Mill Machine for Copper oxalate technology is one of the important basic technologies in the modern industry. In modern industries, the raw materials that require a powder state have a small and uniform particle size and higher purity, passing through ultrafine The raw material has changed, making ordinary materials have a broader application range,
Vibration Mill Machine for Copper oxalate is a gas flow classification device, a grading machine and a cyclone separator, a dust collector, a guide A set of hierarchical systems. It can be accurately classified from 200-5000 destination materials, and the material is moved by the casing of the stratigraphic airflow at the lower airflow at the bottom of the flushing airflow to separate the crude material. Separate, The fine particles that meet the particle size requirements are collected by the grading wheel blade gap. The crude particles are partially fine particles to hit the wall, and the roll wall drops to the secondary tight air, the strong Amoy of the second wind The washing is separated, and the fine particles rises to the secondary grade of the fractionation region, and the crude particles are dropped to the unloading port. This can be accurately graded out of the 1000 purpose powder required by this customer.
ALPA Battery Powder Vibration Mill Machine for Copper OxaLate Case Sharing:
A Industrial Company's main business scope is: new energy storage materials, electronic ceramic materials technology and industries, secondary resource re-production new technology and industries , Biological engineering and organic polymer materials, electronic products and network products technology development, technology transfer, technical training; manufacturing, sales and development products and related materials and equipment; international technical cooperation and trade, technical personnel training; business The import and export business of the export business of this company is export business and the import and export business of mechanical equipment, spare parts, raw materials and technologies needed by the enterprise.
Case parameters: D50: 5.8UM
Horses Yield: 800kg
First, prepare before booting the host, attachment machine, pipeline, and valve, whether it is intact, whether it works fine.
Second, open
1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Switching the fan, cyclone separator discharge, dust removal, feed motor power supply, then turn on the total power supply of the tube bar, set the inverter frequencyThe rate, and then start feed.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter - feeder - Main valve - Compressor - Stepper wheel Motor - Cyclone discharge, dust removal switch - Fan - Total Power - Air Compressor.
4, repair
1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.
4. After the filter bag, you should clean or replace it.
V. Note
1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.
Users who need to purchase Vibration Mill Machine for Copper oxalate products can choose Shan Dong Alpa, which is a manufacturer specializing in the production and sales of various eddy current crushers, affordable, after-sales service.
