Pin Mill Machine for Charcoal PoWder's main applicable pulverization mechanism determines its scope of application, high finished product, widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food, Health products, new materials and other industries.
Pin Mill MACHINE for Charcoal Powder has a small size, light weight, high efficiency, no dust, cleaning, easy to operate, and aesthetics.
The pulverized groove and the blade are made of stainless steel. It can complete the coarse crushed and fine powder in 3 seconds to 2 minutes. It can quickly crush a variety of Chinese herbal medicines and most of the food, wide and wide, and different properties. It is very well pulverized, and the material is losses, and the dissection of different materials will not be strooked.
such as Western ginseng, ginseng, three seventh, placenta, baui, pearl, white peony, 苡 苡 米, green beans, soy, sesame, rice, corn, etc.
Technical parameters:
Finished granularity: 10-45μm
Production capacity: 300kg
1, check before booting Whether there is oil at lubrication.
2, clearing the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.
Welcome everyone to inquire!
