With the continuous advancement of pulverizer technology, Hammer Mill Machine of Exhaust Gas DesulFurization has been familiar with people. The most popular comminution is now the Hammer Mill Machine of Exhaust Gas DesulFurization. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.
Hammer Mill Machine of Exhaust Gas DesulFurization The temperature is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
ALPA Battery Hammer Mill Machine of Exhaust Gas DesulFurization Case Sharing:
A new material company is a new material high-tech enterprise specializing in the research and development, production and sales of lithium-ion battery positive materials, and has more R \u0026 D platforms such as engineering technology research centers, have a variety of invention patents, primary products, three-yuan materials and lithium manganate, etc., and many domestic and foreign customers have maintained a good cooperative relationship. Form a complete industrial chain of a lithium ion battery positive material, providing customers with high quality products.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency,Then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor.
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
If you have the situation about other crushers, you want to know, welcome to consult!
