Rod Pin Pulverizer of Rubber Chemicals

In numerous pulverization, Rod Pin Pulverizer of Rubber Chemicals has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. Especially suitable for crushing drugs such as contaminated materials.

Rod Pin Pulverizer of Rubber Chemicals Main Performance Features:

1, which contains vertical hierarchical devices, product size D97: 8 150 microns adjustable, granular shape, narrow particle size distribution . It can be used in series with multi-stage classifiers, or producing multiple granular products at a time.
2, this device is disassembled and cleaning, the inner wall is smooth, and there is no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process.
3, the control system uses program control and easy operation.



AlPa Anhydrous Glucose Medium Rod Pin Pulverizer of Rubber Chemicals Sharing: A starch sugar company requires a equipment that dispells the water-glucose medium, and a lot of powder is investigated. Body companies have not found appropriate equipment. We have found appropriate equipment in our AlPA. Our Rod Pin Pulverizer of Rubber Chemicals can disperse the water glucose medium.

Technical parameters:

Finished product particle size: waterless glucose greater than 18 mesh


Ultrave ROD PIN Pulverizer of Rubber Chemicals before debugging:

1, newly installed equipment When the equipment is connected to the crushing warehouse, it is inevitable that foreign matter such as iron block, welding head, welding slag is residual. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.

2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the turbine has a leakage, you can use your hands or fine powder to have no in the interface.The feeling of suction, if there is a sealing treatment.After all of the above tests are normal, prepare the material production.


In addition to ROD PIN Pulverizer of Rubber Chemicals, AlPa Technology Co., Ltd. also supplies powder grading machines, ultrafine grace machines, precision classifiers, ultrafine airflow classifiers, jet grades, etc.Welcome to buy!