With the development of society, the application of Impact Pulverizer for Sponge Iron has become more large.
Impact Pulverizer for Sponge Iron work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas increases. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
ALPA Corksyl Impact Pulverizer for Sponge Iron Case Sharing: The company is a professional manufacturer of active biological extracts. It needs a super-smashing machine that meets GMP requirements, and investigates a number of powder equipment manufacturers. Our AlPa's Impact Pulverizer for Sponge Iron.
Technical parameters:
Finished particle size: 100 full pass
Production capacity: 120kg
Today we understand how the usual Impact Pulverizer for Sponge Iron is maintained.
First, the air blower
1. Because the blades in the fan are particularly easy to accumulate, so they must clean the dust in the fan every week.
2, add the bearing box once a month.
3, if there is an abnormality in the fan, it is necessary to stop the ultrafine gas flow classifier for inspection.
Second, the host
1, you should check the graded impeller, spiral feeder, smash nozzle each year, see if there is wear, whether there is a place to replace.
2, running to a certain time, in order not to affect the use of ultrafine gas flow grading machine, some parts must be cleaned.
3, the bearing should make the right amount of lubrication, which will make the temperature abnormally.
Third, the planet waste valve
1, if the ultrafine airflow classifier has an abnormality, it must be downtown immediately.
2, the impeller and the body are cleaned every three months.
3, plus lubricants should also have every three.
Shandong AlPa is a more than 20 years of Impact Pulverizer for Sponge IRON R \u0026 D and manufactured enterprises, after years of precipitation and accumulation, experienced, with multiple patented technologies.In the past many years of Impact Pulverizer for Sponge Iron, there have been tens of thousands of devices at home and abroad, often with customers to order our products again, enough to explain the reputation of Shandong Alpa Impact Pulverizer for Sponge Iron.Welcome to inquire!
