Turbo Mill Machine for Sodium Gluconate plays a vital role in the current industrial production. In major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With the continuous development of Turbo Mill Machine for Sodium Gluconate, the major industries, especially pharmaceuticals, and the food industry has put forward the purity of materials during the pulverization process. The new requirement, it is desirable that the powder can be kept clean. In traditional Turbo Mill Machine for Sodium Gluconate, carbon steel, stainless steel is generally used as a lining material for Turbo Mill Machine for Sodium Gluconate.
Turbo Mill Machine for Sodium Gluconate will rise during work, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.
ALPA Solid mannitol Turbo Mill Machine for Sodium Gluconate case Share: A food company requires large production of solid mannitol ultrafine powder. Many of the domestic powder companies have not found a crusher of the compound GMP standard food grade production. The general compound GMP standard pulverizer does not meet the large capacity required for the company. With our ALPA, the company purchased 1 Turbo Mill Machine for Sodium Gluconate. The demand for the large production of solid mannitol is met, which is satisfied with the GMP standard.
Finished particle size: mannitol: greater than 710 um 7.34%
Production capacity: Mannitol: 2T
When you buy Turbo Mill Machine for Sodium Gluconate, You need high pulverity and no loss. However, before buying, it is necessary to fully understand the internal structure of the crusher and the advantages and disadvantages in the production application. After sufficient understanding, we canTo better choose and apply, today we will learn about Turbo Mill Machine for Sodium Gluconate:
1. Low powder temperature: no cooling system during continuous operation, the resulting powder temperature is never less than 50 degrees;
2. It can be applied to any fiber, high toughness, high hardness or a certain moisture content; for pollen or other spore plants, the material destroying the cell wall can break through 95%;
3.The ultrafine pulverizer can be wetly pulverized by adding water, alcohol or other liquid, or by introducing gas for protective crushing.
After understanding the characteristics of the ultrafine pulverizer, you should pay more attention to it when you purchase later, so you will choose a superfine pulverizer you satisfied.
Shan dong alpa is a world-renowned particle and powder processing system provider. If you want to consult, you can get the answer you want by asking Shandong Alpa to get the answer you want, but it is not just a device.Price, there may be powder technology solutions in your industry, welcome to call us.
