Ring Roller Mill Machine for Black TEA

With the continuous development of pulverizer technology, Ring Roller Mill Machine for Black TEA has gradually penetrated into people's daily lives.

Ring Roller Mill MACHINE for Black TEA is based on the size of the powder particle size, the specific gravity is different, and the settlement speed is different from the principle of the settling speed in the gas. The classifier, cyclone separator, dust collector, and the introducer make a set of hierarchical systems. Under the action of fan pulleys, the material is moved at a high speed, and the up airflow into the grading area. Under the action of the powerful centrifugal force generated by the high-speed rotation grading turbine, the coarse, fine particles are separated, and the fine particles that meet the particle size requirements by the gap of the grading wheel blades or the dust collector are collected. After the crude particles are partially fine particles, the velocity along the wall to the secondary air is disappeared and reduced.

The strong washing effect of the secondary wind, the thick particles are separated, and the fine particles rise to the secondary level of the secondary level, and the crude particles reduce the discharge port.

ALPA Carbon Ring Roller Mill Machine for Black TEA Case Sharing: The company needs to super finely pulverized carbon during the production of static graphite. After many examinations and experiments, we finally selected our AlPA as a cooperative customer, we provided the Ring Roller Mill Machine for Black TEA provided by its Ring Roller Mill Machine for Black TEA to meet its needs of carbon pulverity, particle size, yield and other needs.

Technical parameters:
Finished granularity: D65: 200 目
Production capacity: 800-1000kg

Let's talk about how to correctly use Ring Roller Mill Machine for Black TEA

1. Prepare before booting the host, attachment machine, pipeline, and valve, whether it is intact, whether it works fine.
Second, open

1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter-feeder-main valve-compressor-stepping impeller motor-cyclone discharge, dust removal switch-fan-total power supply-air compressionmachine.
4, repair

1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.
4. After the filter bag, you should clean or replace it.
V. Note

1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.

If there is related requirements, please call us!