Rod Pin Mill Machine of Yam This product technology has been widely valued by the industry. ROD Pin Mill MACHINE OF YAM is mainly used to determine its wide range of applications, high fine, typical materials: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemistry, medicine . Rod Pin Mill Machine Of Yam can convert a normal gas from the gas source portion to nitrogen, carbon dioxide, etc., is an inert gas protection device, which is suitable for use in flammable and explosive, oxidized materials, smash, grading, and processing.
The working process of Rod Pin Mill Machine of Yam is mainly, after the material is accelerated into supersonic flow through the nozzle, the compressed air enters the flow of the crushing area, and the material is fluidized, and each particle has the same movement. state. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.ALPA Squares Rod Pin Mill Machine Of Yam Case Sharing: 2020 Company Successfully Exported to a Rod Pin Mill Machine of Yam in the Philippines.
Technical parameters Finished product fineness: D50: 3μm
Production capacity: 2-20kg / h
Do you know how do you correctly use Rod Pin Mill Machine of Yam? I hope the content below can help you.
2, open the pulverizer
(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance
(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent the bearing temperature too high.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions
(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
As a 20-year powder engineering equipment manufacturer, Shandong, Shandong, has more than 3,000 customers at home and abroad, has always led the front of the industry, so before consulting, you need to provide crushing materials. Feature information, enterprising granular parameters, production yield range, purity requirements, specific process requirements (anti-high temperature, explosion-proof, anti-dust pollution, etc.), professional engineers provide appropriate equipment models or system solutions. Welcome to inquire.
