Pin Pulverizer for Regular Fused Alumina

People currently use in daily life are also more, PIN Pulverizer for Regular Fused Alumina is smashing solid feedstocks of large sizes to standard size, typically smashing into micrometers, usually our equipment There are multiple devices to consist, usually composed of a part of a coarse, fine powder or a wind device, etc. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.

Crushing product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good dispersibility. Since Pin Pulverizer for Regular Fused Alumina generates a Juromon cooling effect during the pulverization process, it is also suitable for low melting point and ultrafine pulverization of thermal materials.

The gas-solid ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated. When the particle size of the feed is pulverized, the particle size of the feed is more stringent.
When the titanium powder is pulverized, when the calcined material is pulverized, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70, and cannot exceed 2-5 mesh.

ALPA Chemical Pigment PIN PULVER For Regular Fused Alumina Case Sharing: The company is a company specializing in research and development, production and sales of high-performance organic pigments. During its production process, pigment ultrafine pulverization equipment needs . The company's ultrafine crushing equipment is from our AlPa, which chooses our company's PIN Pulverizer for Regular Fused Alumina.

Technical parameters:
Finished granularity: 10-45μm
Production capacity: 300kg

Ultra-Pin Pulverizer for Regular Fused Alumina uses air separation, heavy polishing, shear The form of ultrafine pulverized equipment in the form of dry materials is widely used in various industries. Let's take a brief introduction to its daily maintenance content.

1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.
2, RongEasy mill should pay attention to the extent of the wear, pay attention to and prepare for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.

If the later period is intended for ultra-fine classifiers, precision grading machines, jet grading machines, you can directly contact us, product quality is guaranteed, prices are fair, good service, welcome everyone to buy!