Currently, Pin Pulverizer of Polyethertherket has gradually entered people's lives, more and more plants, and companies are using the equipment.
The airflow classification is based on centrifugal force, gravity, inertial force, etc., produces different motion trajectories depending on the gas (usually air), gravity, and inertial force to achieve different particle sizes. Classification. Pin Pulverizer of PolyetHeretherketone can be divided into static classifiers and dynamic classifiers based on whether there is moving parts. Pin Pulverizer of polyetheretherket has developed better and better. Many industries need to control the particle size of fine powder.
ALPA Carbon PIN Pulverizer Of PolyEtHeretherketone Case Sharing: The company produces superfine and super fine pulveruts in the production of static pressure graphite. After multi-party examinations and experiments, finally selected our AlPA as a cooperative customer, we provide the PIN Pulverizer of PolyEtheretherketone provided to the carbon pulverity, particle size, yield, and other needs. Technical parameters:
Finished granularity: D65: 200 目
Production capacity: 800-1000kg
1, The ultrafine pulverizer and power unit should be securely installed. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload. If you find vibration, noise, bearing and body temperatureHigh, outward injection, etc., should be closed immediately and eliminate the failure.
