Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.
Rotor Mill Machine of Adhesives / Sealants is suitable for microfinishing machines such as synthetic resins and instruments. It is different from the ordinary pulverizer. It is not only simply crushed such as impact force and cutting force, but also subject to a large amount of ultrasonic eddy current produced on the back of the blade and the vibration of high frequency pressure generated by the resulting material. Crushing can also be broken, viscous and elasticity under certain conditions. The raw material temperature of the machine increased, and the thermal material can be broken.ALPA Potassium Permanganate Rotor Mill Machine of Adhesives / Sealants Case Sharing: This customer is mainly engaged in the development of high energy chemical energy development. The study needs a device that can make ultraf fine pulverized in high potassium permanganate. Finally, I bought a Rotor Mill Machine of Adhesives / Sealants in our AlPa.
Technical parameters:
Finished granularity:
100-325 目
Production capacity: 5kg
1, ask: How to choose equipment in the face of materials that need to be smashed?
A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
2, ask: The custom pulverizer can be used in different materials. What is the difference between them?
A: (1) After the food and drug is crushing, it is necessary to meet the level of food safety, the best choice for stainless steel materials, because the mirror is polished inside and outside, does not produce iron pollution. (2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal. (3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.
The equipment market is a rapidly changing. At present, the airflow classifier is in the market, but the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.
