In the classification operation of industrial production at this stage, the use of Hammer Pulverizer for Copper Clad Iron Powder is mainly for solid particles effective and crushing. equipment.
In the production process of breaking using Hammer Pulverizer for Copper Clad Iron Powder, the supersonic gas stream generated by the device can constantly collide between the materials, and this supersonic airflow can also be The raw material produces a good impact, and then the material can also have a good crushing effect with the inner wall of the equipment.
AlPa Gypsum Hammer Pulverizer for Copper Clad Iron Powder Case Sharing: The company is a more well-known non-metallic mine company in South Africa. The company's main product is a super fine ultra-fine micropowder of non-metallic mine such as stone and gypsum. Through our website, the company learned our equipment and saw our case, and finally chose to buy our company's Hammer Pulverizer for Copper Clad Iron Powder as its gypsum ultrafine powder production line.
Technical parameters:
finished particle size: D97: 5UM
Production capacity: 140kg
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.
