Ring Roller Pulverizer With High-Speed \u200b\u200bIron Steel Powder as a clean, efficient, high-level, high-yield of advanced crusher model in the pulverization of Western medicine raw materials, from a few grams of dozens The microsect test of grams will be produced at a large production of hundreds of tons, and the air flow mill is narrow by it: the particle size distribution is narrow, the average particle size is fine; the powder is good, the product is high; suitable for low melting point, thermal drugs; sealed Good, less pollution; easy to operate; crushing - mixed - dry online operations, etc. have been widely recognized by the company.
The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.
ALPA Gelle Ring Roller Pulverizer With High-Speed \u200b\u200bIron Steel Powder Case Sharing: This customer is a high-tech enterprise in R \u0026 D, production and sales of nano-energy, fireproof, and insulation new materials. Ultrafine pulverizer needs to be used during the production process, and multi-party examine the last purchase of our AlPa Ring Roller Pulverizer with High-Speed \u200b\u200bIron Steel Powder.
Technical parameters:
finished particle size: D90: 15-30UM
Ring Roller Pulverizer with High-Speed \u200b\u200bIron Steel Powder is a more accurate machinery, during daily use and maintenance, some Details still need operators' attention. In order to improve the pulverization efficiency of gas flow mill, it is necessary to check whether the feedstock meets the requirements before the production, and the foreign matter is strictly prohibited into the raw material.
In production, a certain number of materials must be maintained in the airflow grinding chamber. In the case where the flow rate of the pulverized gas is not changed, the material in the grinding cavity is large, the gradient current is large, and the material is small in the grinding cavity, the gradient current is small.
In addition, the feeding speed must remain uniform and stable, don't be too fast or too slow.
If the feeding speed is too fast, the device will overload.
Regular maintenance equipment, often check whether the air supply pressure meets the pressure required for pulverizationAnd the gas flow grinding motor, the equipment is running 3000 hours, or the long-term shutdown and long-term storage are used, should be cleaned on the inner wall of the airflow grinding machine nozzle and the grinding chamber and attached to the material grading portion to prevent gas flow grinding grinding.The effect of the effect.
