Rotor Grinder with Codonopsis is well balanced, only need to be produced in a smooth ground, low noise, and avoid dust leakage during the pulverization process, which is favored by the powder industry.
High temperature Rotor Grinder with Codonopsis performance characteristics:
1, the contents of the set type D97: 8-150 microns are adjustable, the granular shape is good, and the particle size distribution is narrow.
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.
ALPA Quartz Powder Rotor Grinder with Codonopsis Case Sharing:
A mining company specializes in the development and production of quartz sand, silicon powder,
company produces various models, various quality Indicators of quartz sand and water-washing stone sands are widely used in: glass and glass products, metallurgical manufacturing, cast steel, precision cast, furnace, refractory, ceramic glaze, ceramic billet, rubber, coating and other industries, welcome to factory Investigation, guidance, negotiation business!
Case parameters:
Product particle size: D100: 11.5UM
Hours Yield: 380kg
Rotor Grinder with Codopsis Switch When there is oil, it is timely cleaning [ 123]
Rotor Grinder with Codopsis has been exchanged into an essential equipment in the field of industrial manufacturing. It is not only the advantage as a common production equipment, and sometimes Rotor Grinder with Codonopsis will also be damaged. Xiaobian Let's see how to check the repair equipment.
Daily maintenance Rotor Grinder with Codonopsis To check the power outlet, plug, the power cord is no oxygen offset, the break, if you do not have a power test machine, when the motor is powered, do not rotate When the drain sheet can be rotated, it can be determined that one capacity fails in the two start capacitances of the machine. If you can make a discharge spark and a very frightening, the capacitor can be used; if the sparks and sound are weak, the capacity of the capacitance has decreased, and the new or add a small capacitor. The airflow pulverizer does not use this method if the capacitor has damaged the short circuit, and it must be replaced with the same size new product.
In addition to Rotor Grinder WiTH Codonopsis This type of product is a rod mill high-speed pulverizer. This crusher is generally very good, and daily maintenance is more important. The following is the maintenance focus of this type of airflow pulverizer. Check if the lubrication of the bearing is good to check if all fasteners are tight. Check if the drive belt is installed correctly and the situation is good. Check if the protective device is good. If the protective device is found, it should be excluded in time. Check that there is no material or other debris in the damage chamber, if it is sometimes cleaned. Check if the hydraulic starting machine head or the starting roof rod is returned, the adjustment space is installed correctly and compact.
The above is the knowledge of the daily maintenance and maintenance of the Rotor Grinder with Codonopsis manufacturers.
The company has consistently follows the management of the standard, puts the quality in the first production and service policy, providing customers with the product and services of the airflow crusher that weigh the heart.
