Ring Roller Grinder with peel

Most of the product production and processing in the current stage, using Ring Roller Grinder with peel, the use of Ring Roller Grinder with PEEL is a very common way of processing, with the continuous improvement of scientific productivity, and the technology of grading equipment It is also imminent to replace. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

Ring Roller Grinder with peel should be installed in a place where the site is smooth.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.

ALPA Precipitated Sulfate Ring Roller Grinder with Peel Case Sharing: Shenzhen Chemical Raw Material Company requires multiple large production, low particle size precipitated sulfate crushing production line. Our AlPA is a large enterprise in the powder equipment industry, and our equipment is customized. Different companies are used to meet different needs of different companies. In response to the needs of the company, our company customizes the production line of five Ring Roller Grinder With Peel, large mechanical crusher production lines to meet the customer's production needs.

Technical parameters:
Finished particle size: D50: 0.8-5μm
Production capacity: 4.5 +/- 10% / T

After long-term use, it is necessary to return Roller Grinder WITH PEEL is cleaned. Before the airflow pulverizer is cleaned, all machines should be disassembled. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is unloading, you can remove the four screws on the base, then remove the hopper. When sieved, the air pulverizer door can be opened directly, and finally the screen can be disassembled. After removing the movement gear, release the fastening nut first, then separate the live teeth from the spindle. Then remove the active gear and place it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the air pulverizer and must never be damaged by machine components.

The performance characteristics of the milling machines of each series are different. Different granularity, different production efficiency, different production and production environment, the price of processing equipment is also different, customers can consult the ALPA engineers to purchase appropriate models and specifications according to their own situation, welcomeInquire.