With the rapid growth of China's economy, high-energy mining machinery industry, especially Cell Crusher With Clay Ore will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development of the entire mineral powder industry, green, environmentally friendly, healthy fluidized bed jet mills and products are more extensive. When applied to people's lives, it is necessary to optimize the use of equipment technology.
In the process of production, Cell Crusher With CLAY ORE is mainly used to pass the freezing, filtration, and drying in the apparatus, form a supersonic air air flow through the nozzle inside the apparatus. After a powerful pressure rotation into the grinding chamber, the material to be pulverized in the grinding chamber exhibits a fluidized form.AlPa Trimage Cell Crusher With Clay Ore Case Sharing:
A electromechanical company is mainly dedicated to production equipment such as push booth, roller furnace, mesh furnace and other products, and products are widely used in new energy Battery, electronic components and other fields. The company has always adhered to the principle of \"people-oriented, innovation first\". The company has established a good relationship with multiple international companies. With exquisite technology, we will have our customers' support and trust. We will give back to our customers with quality products and services to make better contributions to electromechanical needs.
Case parameters: D50: 15μm
Hour Yield: 600kg
Cell Crusher With CLAY OR Job Safety Application Basic Requirements
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7, pay attention to at any timeThe operation of the equipment is evenly feeding to prevent blocking bullies, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.
The above is the Cell Crusher With Clay Ore Related content, provided by Shan Dong Alpa.The company has consistently follows the management of the standard, puts the quality in the first production and service policy, providing customers with confidence and a weighing crusher product and services.
