In many crushing methods, Rotor Grinder with Wax Powder has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.
In the production process of crushing using Rotor Grinder with Wax Powder, the ultrasonic air flow generated by the device can constantly collisions between materials, and this supersonic airflow can also produce raw materials. A very good impact, and then the material can also have a good crushing effect with the inner wall of the equipment.
ALPA Gypsum Rotor Grinder with Wax Powder case share: The company is a more well-known non-metallic mine company in South Africa. The company's main product is a super fine ultra-fine micropowder of the non-metallic mine such as Fangli and gypsum. Our website learned our equipment and read our case, and finally chose to bought our company's Rotor Grinder with Wax Powder as its gypsum ultrafine powder production line.
Technical parameters:
finished particle size: D97: 5UM
Production capacity: 140kg
How to continue Rotor Grinder with Wax Powder life? Here are the following aspects:
1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.
2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.
3, regular inspections for the lids, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.
If you have the situation about other crushers, you want to know, welcome to consult!
