Shandong Airflow The mill introduces the installation and commissioning of stainless steel Chinese medicine ultrafine pulverizer
Installation and commissioning of the ultrafine pulverizer of the stainless steel
1, the machine must be stable after position, and secure it with the ground screw.
2, before the test, the inner cavity of the machine should be cleaned and lock the front cover with a star handle.
3. After the power is turned on, it should be noted that the spindle is rotated in the direction shown.
4, should pay attention to whether the machine has abnormal noise when testing in order to stop checking in time.
5, in the crack, install the storage bag.
Stainless steel Chinese medicine ultrafine pulverizer operation and precautions:
1, before use, check whether all fasteners of the machine are tightened, and the belt is tensioned.
2, the spindle operation direction must comply with the direction of the arrow on the shield, otherwise the machine will damage the machine and may cause personal injury.
3, check if the appliance is complete.
4, check the hard debris such as metal in the machine pulverization room, otherwise the tool will be damaged, affecting the machine.
5, the material must check the purity before crushing, not allowing metal hard debris to mix, so as not to damage the tool or cause combustion and other accidents.
6, the oil cup on the machine should often be injected into the lubricant to ensure that the machine is operating normally.
7. Stop the addition before the stop, if you do not continue to use, remove the legacy of the machine.
8. Regularly check if the tool is damaged by the screen. If it is damaged, it should be replaced immediately.
9. It will be slightly vibration when using the timing. Be sure to connect the handle to the handle to avoid accidents.
